Right End Cap (ECR) Module | 1769-ECR | Allen Bradley

Brand:       Allen-Bradley

Model:      1769-ECR

Type:         Right End Cap (ECR) Module

Introduction:

The Allen-Bradley 1769-ECR is a Right End Cap (ECR) module that is used with the CompactLogix controller series. This module functions as a bus terminator, terminating the FlexBus circuitry, and signaling the end of the CompactLogix assembly. This module is necessary to qualify the CompactLogix configuration. The 1769-ECR features a current draw of 5 mA at 5.1 VDC. It has an operating altitude of 2000 m or 6562 ft and approximately weighs 130 grams or 0.286 lb.

It has an open style enclosure rating, an operating temperature of 0 -60 °C or 32-140 °F) while the storage temperature is -40 to 85 °C (-40 to 185 °F and relative humidity of 5-95%, non-condensin Removal or insertion under power will cause controller error and stoppage which is not desirable, especially with a functional and actively operating system. To install the 1769-ECR, the bus lever must be lifted from its engaged position. Once done, align the ECR module along with the guide slots and gently push the ECR module until it is adjacent and in line with the CompactLogix module. Engaged the bus lever to connect the ECR module and close the FlexBus.

The Allen-Bradley 1769-ECR is a right-end cap or terminator that terminates the end of the communication bus of a 1769 controller. It has a maximum bus current draw of 5 mA at 5V DC. Also comes with an operating altitude of 6562 feet and an approximate shipping weight of 0.286 lbs. It has an open-type enclosure to ensure safety and it can adapt to certain conditions to reduce the risk of fire and injury. To meet health and safety requirements, the 1769-ECR should be installed with IP54 protection when applied in zone 2 environments because it has no tolerance for sunlight and other UV radiation sources.

The 1769-ECR has an operating temperature of 32 – 140 deg. F-tested in cold, dry heat, and thermal shock environments. It has a non-operating temperature of 40 – 185 deg. F tested un-packaged during cold, dry heat, and thermal shock. The also 1769-ECR has a 5 – 95% non-condensing relative humidity and its vibration reaches 5 g at 10 – 500 Hz tested during operation. It has an operating shock is 20 g on a DIN rail mount and 30 g on a panel mount. Its non-operating shock is 30 g on a DIN rail and 40 g on a Panel mount.